To Next Page

To Previous Page

Lift the rear of the seat.

The seat can be damaged

at the edges if it is placed

on a rough surface.

Lay the seat upholstered side

down on a smooth, clean sur-

face, such as the fuel tank.

Release the key and pull the

seat back out of its holder.

Installing the seat

If too much pressure is ap-

plied in the forward direc-

tion, there is a danger that the

motorcycle will be pushed off its

stand.

Always make sure that the

motorcycle is stable and firmly

supported.

Slide the seat forwards into the

holders 1, then press the rear

firmly downwards.

The seat engages with an aud-

ible click.

Luggage loops

Removing the seat ( 67).

Turn the seat upside down.

Pull the loops 1 out of the

holders 2 and lay them on the

outside.

Installing the seat ( 68).

Operation

Other manuals for BMW K1300R

Questions and Answers:

Need help?

Do you have a question about the BMW K1300R and is the answer not in the manual?

General

Displacement	1293 cc
Transmission	6-speed
Fuel Capacity	19 liters (5.0 US gal)
Seat Height	820 mm (32.3 in)
Bore x Stroke	80 mm x 64.3 mm
Compression Ratio	13.0:1
Fuel System	Electronic fuel injection
Final Drive	Shaft
Rear Brake	Single 265 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	217 kg (478 lb)
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	173 hp (129 kW) at 9, 250 rpm
Torque	140 Nm at 8, 250 rpm
Weight	243 kg
Front Suspension	Duolever
Rear Suspension	Paralever
Front Brake	Dual 320 mm discs, 4-piston calipers