ASC intervention
General warning light quick-
flashes yellow.
ASC symbol appears on
the display.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than ASC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
Self-diagnosis not
completed
ASC symbol flashes.
Possible cause:
Self-diagnosis did not complete,
so the ASC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for ASC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.
ASC deactivated
ASC symbol appears on
the display.
Possible cause:
The rider has switched off the
ASC system.
with Automatic Stability Con-
trol
OE
Activate the ASC function
( 60).
ASC fault
General warning light shows
yellow.
ASC symbol appears on
the display.
Possible cause:
The ASC control unit has detec-
ted a fault. The ASC function is
not available.
You can continue to ride. Bear
in mind that the ASC function
is not available. Bear in mind
the more detailed information
on situations that can lead to
an ASC fault ( 89).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
RDC warnings
Mode of presentation
with tyre pressure monitoring
(RDC)
OE
The tyre-pressure readings are
based on a reference tyre tem-
perature of 20 °C ( 90).
3
36
z
Status indicators
To Next Page
Loading...
Need help?
General
