one as soon as the grips are
warm. Grip heating can be ac-
tivated only when the engine is
running.
Repeatedly press button 1 until
the desired heating stage ap-
pears on the display.
Heating off.
50% heating power
100% heating power
The selected heating stage will
be saved if you allow a certain
length of time to pass without
making further changes.
The most recently selected
information will shortly appear
in the display.
Clutch
Adjusting clutch lever
If the position of the clutch
fluid reservoir is changed,
air can enter the clutch system.
Do not twist the handlebar fitting
or the handlebars.
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1 clock-
wise.
The adjusting screw is easi-
er to turn if you push the
clutch lever forward.
Span between handlebar grip
and clutch lever increases.
Turn adjusting screw 1
counter-clockwise.
Span between handlebar grip
and clutch lever decreases.
Brakes
Adjusting handbrake lever
Changing the position of
the brake-fluid reservoir can
allow air to penetrate the brake
system.
Do not twist the handlebar fitting
or the handlebars.
Attempting to adjust the
brake lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
brake lever unless the motorcycle
is at a standstill.
4
61
z
Operation