Appliance description
EN
bora.com 73
u
Try to avoid placing frozen food on the perforated
stainless steel tray.
u
Only use the perforated stainless steel tray for
temperature settings up to 120 °C.
Fig.4.5
Perforated stainless steel tray
Oven rack
T
Material: stainless steel
T
Size (W x D x H): 469 x 358 x 38.5mm
When running the cleaning programme, the oven rack is
used as a support for the cleaning cartridge. The raised
edge on the oven rack prevents the food from sliding
off.
u
Insert the food support on a shelf level with the
raised edge facing the oven.
Fig.4.6
Oven rack
Using the food supports
u
Do not use knives on the food supports.
u
Do not use any metal or sharp objects to turn or
remove food.
u
Only use plastic or wooden kitchen utensils.
Food supports may expand when heated (thermal
behaviour). If heated unevenly, the metal will expand to
different extents. The measures below can be taken to
prevent deformation:
u
Preheat the X BO without the food supports.
u
Load the food supports evenly.
u
Use the food supports as instructed.
u
Use a suitable tray or tin for pizzas, round cakes and
similar and place this on the oven rack.
u
Avoid placing cold food or water directly on the hot
food support.
u
Use the universal tray for searing and roasting.
Inserting/removing food supports
u
Place the food support on the shelf guides at the
required level and push until it comes to a stop in the
oven chamber.
Fig.4.7
Inserting food supports
The food supports have a protection mechanism that
prevents them from sliding out of the front of the shelf
guide.
u
Lift the food support to take it out.
4.7
Demo mode
There are three demo modes to choose from with
limited functions:
T
No heat or water
T
Water but no heat
T
Video sequence – oven cannot be operated
To Next Page
Loading...
General