Bosch Access Easy Controller 2.1 User Manual

Access Easy Controller 2.1 Appendix G Blank Configuration Form | en 127
Robert Bosch (SEA) Pte Ltd Hardware Installation Manual 2018.11 | 1.0.6 | F.01U.122.796
24 Appendix G Blank Configuration Form
This chapter provides blank configuration form for 4-Reader boards or 8-IO boards. The
System Installer could use them to plan the set up before commencing on the installation. This
form will also help the Installer doing the AEC2.1 programming to assign the correct address
to devices in the system.
AEC2.1 Boards Configuration Page ____ of ____
4-Reader Board
SW1 Address Settings:
Reader Ports Reader Number / Description (e.g. Reader #1 / Door 1)
T8-1 to T8-6
T9-1 to T9-6
T10-1 to T10-6
T11-1 to T11-6
Input Channels Device Connected / Description (e.g. Exit Push Button for Door 1)
T6-1 and T6-2
T6-3 and T6-4
T6-5 and T6-6
T6-7 and T6-8
T7-1 and T7-2
T7-3 and T7-4
T7-5 and T7-6
T7-7 and T7-8
Output Channels Device Connected / Description (e.g. Door Strike for Door 1)
T2-1 to T2-3
T2-4 to T2-6
T3-1 to T3-3
T3-4 to T3-6
T4-1 to T4-3

Bosch Access Easy Controller 2.1 Specifications

General

Brand	Bosch
Model	Access Easy Controller 2.1
Category	Controller
Language	English