Bosch Access Easy Controller 2.1 User Manual

Access Easy Controller 2.1 4-Reader Board | en 23
Robert Bosch (SEA) Pte Ltd Hardware Installation Manual 2018.11 | 1.0.6 | F.01U.122.796
6 4-Reader Board
This chapter describes one of the interface boards used by the AEC2.1 system. This section
identifies and locates key components on the board and includes a brief overview of the
functional operation.
The first is the 4-Reader board, which provides all the termination points needed to fully
manage four card readers and all associated supporting hardware. The board size and location
of mounting holes on both the 4-Reader board and 8-IO board are the same.
6.1 Technical Overview of 4-Reader Board
Figure6.1: 4-Reader Board
6.1.1 Component Layout of 4-Reader Board
The diagram below shows the layout and major components of the 4-Reader board. A brief
technical description of the components is provided in the following pages.

Bosch Access Easy Controller 2.1 Specifications

General

Brand	Bosch
Model	Access Easy Controller 2.1
Category	Controller
Language	English