Access Easy Controller 2.1 Before You Begin | en 9
Robert Bosch (SEA) Pte Ltd Hardware Installation Manual 2018.11 | 1.0.6 | F.01U.122.796
2 Before You Begin
2.1 General
Access Easy Controller is a web based security system that allows you to control and monitor
access routes with flexibility and conveniences to suit individual needs.
This hardware manual helps you understand the Access Easy Controller 2.1 and helps the
system serve you better. Access Easy Controller is a solution invented for life.
2.2 Terminologies
The Access Easy Controller 2.1 Hardware Manual contains detailed information and
connection diagrams for Access Easy Controller 2.1, its components, and peripheral field
devices.
The following terminologies are used to describe the components and peripheral field devices
in Access Easy Controller 2.1 Hardware Manual.
Terminology Descriptions
Access Easy Controller 2.1
(hereinafter will be referred as
“AEC2.1”)
Access Easy Controller 2.1 enclosure with PSU,
CPU board and an Interface board (4-Reader
board).
Access Easy Extension Unit
(hereinafter will be referred as
“Extension Unit”)
Access Easy Controller 2.1 enclosure with PSU and
space for 2x interface boards (4-Reader or 8-Input-
Output board) and a backup battery.
4-Reader Board (hereinafter will be
referred as “4-Reader board”)
Interface board for Access Easy Controller 2.1 and
Extension. The board supports 4 Wiegand readers
and provides 8 input and 8 output connection ports
for door control.
8-Input-Output Board (hereinafter will
be referred as “8-IO board”)
Interface board for Access Easy Controller 2.1 and
Extension. It supports 8 inputs and 8 outputs,
fitting parts.
CPU Board Access Easy CPU board. The CPU is the main
controlling devise in Access Easy Controller 2.1
system.
Power Supply Unit (hereinafter will be
referred as “PSU”)
The Power Supply Unit used in Access Easy
Controller 2.1 has an input power of 100~240 VAC.
EM Reader Access Reader 8000 Wiegand EM Prox.
To Next Page
Loading...
Need help?
General
