Braun 07 Series User Manual

Page 5
Installation/Service Safety Precautions
Adjust platform angle and floor level positioning of bridge plates and inboard roll stops as
detailed in this manual before operating lift with passenger.
Meet all lift positioning and clearance specifications as detailed in the Positioning and
Clearance Checklist before operating lift with passenger.
Maintenance and repairs must be performed only by authorized service personnel.
Perform maintenance and lubrication procedures exactly as outlined in the Maintenance
and Lubrication Schedule contained in this manual.
Disconnect the power cable at the battery prior to servicing.
Keep hands, arms and all other body parts clear of moving parts.
Never modify (alter) a Braun Corporation lift.
Replacement parts must be Braun authorized replacements.
Never install screws or fasteners (other than factory equipped).
Whenever replacing a hydraulic cylinder or seals, lower platform fully.
The lift owner's (operator's) manual must be in the lift-mounted manual storage pouch
when the consumer receives the lift.
Failure to follow these safety precautions may result in serious bodily injury and/or prop-
erty damage.
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
W
A
RNING
Installation/Service Safety Precautions
W
A
RNING

Braun 07 Series Specifications

General

Brand	Braun
Model	07 Series
Category	Lifting Systems
Language	English