1. Transparent window, for accessing front panel and buttons
2. Port for patient circuit
3. Cooling air inlet
4. Port for cables and O
2
inlet
5. Mounting straps
6. Patient air inlet
CAUTION!
Do not cover the air inlets or outlets.
5.7.10 Using the Vivo 45 LS with the Trolley
Intended Use
The intended use of the trolley system is to allow patient mobility while receiving venti-
lator treatment. The trolley shall only be used in indoor, hospital environment. The trol-
ley system consists of a trolley base and a mounting bracket.
This section describes how to use the Vivo 45 LS and a trolley with mounting bracket.
How to Use the Vivo 45 LS 107
Doc. 007301 K-1 User manual