7. CORRECT USE
25
KE-484C
7. CORRECT USE
7-1. Installing the needle
CAUTION
Turn off the power switch before installing the needle, otherwise the machine may operate if the foot switch is depressed by
mistake , which could result in injury.
Loosen the set screw (1), insert the needle (2) as far as it will go
so that the groove is facing toward you, and then tighten the set
screw (1).
7-2. Threading the upper thread
CAUTION
Turn off the power switch before threading the thread, otherwise the machine may operate if the foot switch is depressed
by mistake, which could result in injury.
Thread the upper thread correctly as shown in the illustration below.
3176Q
To Next Page
Loading...
Need help?
General
