Home > Network > Network Features > Reset the Network Settings to Factory Settings
Reset the Network Settings to Factory Settings
You can use the buttons on the control panel to reset your machine to its factory settings. This resets all
information, such as the password and IP address.
You can also reset the print server to its factory settings using Web Based Management.
1. Press (Wi-Fi) and (STOP) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts
blinking.
2. Press and hold COLOR COPY for two seconds.
3. Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from
the power source.
Related Information
• Network Features
125
To Next Page
Loading...
Need help?
General