Home > Introduction to Your Machine > LED Patterns and Indications
LED Patterns and Indications
The LEDs on your machine's control panel light up or blink to indicate machine status.
LED Description
The LED is off.
The LED is lit.
The LED is blinking.
The LED is blinking slowly and faintly.
LED Status Description
(Lit)
Standby The machine is ready to print.
(Blinking)
Busy The machine is processing a print job.
Warming Up (Low Temperature) The machine is warming up.
Cooling Down (High Temperature) The machine is cooling down.
Data Remaining There is print data in the machine's memory. To
cancel the job and clear it from machine memory,
press (STOP).
(Blinking alternately)
Job Canceled The machine is canceling the print job.
(Blinking slowly and
faintly)
Sleep In Sleep mode (Power Save mode), the machine
acts as if it is turned off, but it can still receive data.
When you send a print job, the machine wakes up.
Related Information
• Introduction to Your Machine
Related Topics:
• Error and Maintenance LED Indications
12
To Next Page
Loading...
Need help?
General