55
Selecting the Processing Parameter
The image you capture can be processed to look more vivid or more
subdued. The processing parameters can be set according to the
preset Parameter 1, Parameter 2, and Adobe RGB. Or they can be set
to Set 1, 2, or 3 that you can set yourself.
Select [Parameters].
•
Select the <˙> tab.
•
Press the <å> keys to select
[Parameters], then press <p>.
1
Select the processing parameter.
•
Press the <å> keys to select the
desired parameter, then press <p>.
(The respective settings are shown
below.)
2
Processing Parameters
* sRGB will be set as the color space for parameters other than Adobe RGB.
Parameter Description
Parameter 1
The image will have vivid and crisp colors. In the Basic
Zone modes, all images will be taken in this way.
Parameter 2
The colors will be more subdued compared to
Parameter 1.
This is mainly used for commercial printing.
Since the image will look very subdued, image
processing will be required. This setting is not
recommended for users who do not know about image
processing and Adobe RGB.
* The ICC profile is not appended. To convert the profile, you
must set Adobe RGB.
Set 1, 2, 3 First set the parameters with [Set up]. (p.56)
Setting Selects Set 1, 2, or 3.
Adobe RGB
To Next Page
Loading...
Need help?
General
