58
File Numbering
The images you take are automatically assigned a file number from
0001 to 9999 and saved in a folder (created automatically) that can
hold up to 100 images. The file number is akin to the frame number of
film images. The automatic file numbering method can be set to
[Continuous] or [Auto reset].
The file numbering continues in sequence even
after you replace the CF card. Since this
prevents any images from having the same file
number, it makes it easier to manage the
images with a personal computer.
Each time you replace the CF card, the file
numbering will be reset to the first file number
(XXX-0001). Since the file number starts from
0001 in each CF card, you can organize images
according to the CF card.
1
Select [File numbering].
•
Select the <∆> tab.
•
Press the <å> keys to select [File
numbering], then press <p>.
Select the file numbering method.
•
Press the <å> keys to select
[Continuous] or [Auto reset], then
press <p>.
2
Auto Reset
If folder No. 999 is created, [Folder number full] will appear on the LCD
monitor. Then if file No. 9999 is created, “
” will be displayed on the
LCD panel and in the viewfinder. Replace the CF card with a new one.
Next sequential
file number
File numbering after
changing the CF card
XXX-0001
CF card-1
XXX-0002
CF card-2
File numbering after
changing the CF card
XXX-0001
CF card-1
XXX-0001
CF card-2
File number
is reset
Continuous Numbering
To Next Page
Loading...
Need help?
General
