76
Auto Exposure Bracketing
With auto exposure bracketing (AEB), the camera automatically
changes the exposure level up to +/
–
2 stops in 1/3-stop increments for
three successive shots.
Standard exposure Decreased exposure Increased exposure
Set the AEB amount.
•
Press the <µ> keys to set the
desired AEB amount, then press
<p>.
s
The <L> and AEB level will appear
on the LCD panel.
2
Select [AEB].
•
Select the <˙> tab.
•
Press the <å> keys to select [AEB],
then press <p>.
1
Shoot.
s
The three bracketed shots will be
exposed in the following sequence:
standard exposure, decreased
exposure, and increased exposure.
s
As shown on the left, the respective
bracketing amount will be displayed as
each bracketed shot is taken.
s
The current drive mode will be used for
the bracketing.
3
standard exposure
decreased exposure
increased exposure
AEB range
To Next Page
Loading...
Need help?
General
