Canon iR6000 Service Handbook

CHAPTER 4 SERVICE MODE
4-58
4.3 SORTER
PNCH-HLE
Use it to adjust the position of the punch holes (paper feeding direction)
when the puncher unit is used.
• A higher setting moves the punch holes toward the leading edge
(middle) of the sheet.
Range of -4 to +2 (unit; mm)
adjustment
Using the Mode
1) Make a print of the Test Chart, and check the position of the holes.
2) Select this item, and change the setting as needed.
3) Press the OK key.
4) Make a print of the Test Chart once again, and see that the position for
the holes is as indicated.
SORTER>ADJUST
Feeding direction
Higher setting Lower setting
Paper
F04-403-01

Canon iR6000 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan
Print Speed	60 ppm
Duplex Printing	Yes
Network Connectivity	Ethernet
Paper Sizes	A3, A4, B4, B5
Warm-Up Time	30 seconds
Multiple Copies	Up to 999
Magnification	25-400%
Copy Speed	60 ppm (A4)