Canon iR6000 Service Handbook

CHAPTER 2 STANDARDS AND ADJUSTMENTS
2-35
4.10 Adjusting the Position of the Delivery Flapper Solenoid
(SL5)
Adjust the position of the mounting screw [2] using the screw [2] so that the drive lever
[1] is pushed fully when the solenoid turns on (i.e., when the plunger is drawn).
F02-410-01
4.11 Adjusting the Position of the Right Deck Pickup Solenoid
(SL6)
Adjust the position of the solenoid so that the left edge of the arm 2 is 57.2 ± 0.5 mm
from the center of hole A of the solenoid mounting base.
F02-411-01
[2]
[1]
[A]
57.2 0.5mm
±

Canon iR6000 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan
Print Speed	60 ppm
Duplex Printing	Yes
Network Connectivity	Ethernet
Paper Sizes	A3, A4, B4, B5
Warm-Up Time	30 seconds
Multiple Copies	Up to 999
Magnification	25-400%
Copy Speed	60 ppm (A4)