Canon Laser Shot LBP2900 User Manual

Using the Printing Functions
4-21
Printing a Document
4
This dialog box allows you to specify detailed finishing settings.
[Paper Source] Sheet
You can specify the following printing preferences in the [Paper Source] sheet.
■ [Paper Type]
Specifies the type of paper used in the printer.
Configure this setting as follows:
*When printing envelopes, index card or custom paper, the printer automatically changes the printing mode to suit
the paper type when you change the [Output Size] setting in the [Page Setup] sheet.
*You can only select [Transparency] if the [Output Size] in the [Page Setup] sheet is set to either A4 or Letter size.
Printer Driver
Setting
Paper Type
[Plain Paper] Plain Paper (64 to 90 g/m
2
), Label Paper
[Plain Paper L]
If the paper curls excessively when you are printing on plain paper (64
to 90 g/m
2
) with the [Paper Type] setting set to [Plain Paper], try
setting the [Paper Type] setting to [Plain Paper L].
[Heavy Paper] Heavy Paper (91 to 163 g/m
2
)
[Heavy Paper H]
Select this if you want to get improved fixing properties over the
results of printing using the [Heavy Paper] setting.
[Transparency] Transparencies

Canon Laser Shot LBP2900 Specifications

General

Print Technology	Laser
Print Speed	12 ppm (A4)
Paper Handling	150-sheet input tray
Connectivity	USB 2.0
Memory	2 MB
Dimensions	370 x 251 x 217 mm
Weight	5.7 kg
Supported Paper Types	Plain Paper, Heavy Paper, Transparency, Label, Envelope
Operating System Support	Linux
Warm-up Time	0 seconds
First Print Out Time	9.3 seconds
Paper Size	A4, Letter, Legal
Power Consumption	259 W (Printing), 2 W (Standby)
Print Resolution	2400 x 600 dpi