Canon Laser Shot LBP2900 User Manual

Clean the outside of the printer
5-19
Routine Maintenance
5
Clean the outside of the printer
If dirt and dust builds up on the outside of the main unit after you use the printer for
a long period of time, you should clean the printer. To avoid damage to the printer
and electrical shocks while cleaning, observe the following precautions when
cleaning.
WARNING
• Turn the printer off and remove the plug from the wall when you are cleaning the
printer. Failure to do so may cause fire or electrical shock.
• Do not use alcohol, benzene, thinners or any other inflammable substance. If an
inflammable substance comes into contact with the electrical unit inside the
printer it may ignite or cause an electrical shock.
IMPORTANT
• Be careful not to use a cleaning agent other than water or a mild detergent mixed with
water as it may deform or crack the plastic materials in the printer.
• When using a mild detergent, be sure to dilute it with water.
• This printer does not need to be lubricated. Do not lubricate the printer.
1 Turn the printer and computer off aa
aa
, remove the USB cable bb
bb
,
and disconnect the power plug from the power outlet
cc
cc
.
a
c
b
a

Canon Laser Shot LBP2900 Specifications

General

Print Technology	Laser
Print Speed	12 ppm (A4)
Paper Handling	150-sheet input tray
Connectivity	USB 2.0
Memory	2 MB
Dimensions	370 x 251 x 217 mm
Weight	5.7 kg
Supported Paper Types	Plain Paper, Heavy Paper, Transparency, Label, Envelope
Operating System Support	Linux
Warm-up Time	0 seconds
First Print Out Time	9.3 seconds
Paper Size	A4, Letter, Legal
Power Consumption	259 W (Printing), 2 W (Standby)
Print Resolution	2400 x 600 dpi