Canon Laser Shot LBP2900 User Manual

Replacing the Toner Cartridge
5-11
Routine Maintenance
5
• Be careful not to hold or touch sensitive areas such as the sensor or electrical
contacts. Doing so may damage the toner cartridge.
5 Place the toner cartridge on a flat surface, then slowly pull out
the sealing tape (approx. 50 cm in length) while supporting
the toner cartridge.
Pull the sealing tape out directly in the direction of the arrow.
CAUTION
If you pull on the sealing tape with excessive force or stop pulling midway,
toner may spray from the tape. If toner gets into your eyes or mouth, wash
it out immediately with cold water and consult a doctor.
IMPORTANT
• Do not bend the tape or pull it up or down. If you do, the sealing tape may break in
the middle, and you won't be able to fully remove it.
• Keep pulling on the tape until it is fully removed from the cartridge. If any sealing
tape is left inside the toner cartridge, you may experience printing problems.
Electrical
Contacts
Electrical
Contacts

Canon Laser Shot LBP2900 Specifications

General

Print Technology	Laser
Print Speed	12 ppm (A4)
Paper Handling	150-sheet input tray
Connectivity	USB 2.0
Memory	2 MB
Dimensions	370 x 251 x 217 mm
Weight	5.7 kg
Supported Paper Types	Plain Paper, Heavy Paper, Transparency, Label, Envelope
Operating System Support	Linux
Warm-up Time	0 seconds
First Print Out Time	9.3 seconds
Paper Size	A4, Letter, Legal
Power Consumption	259 W (Printing), 2 W (Standby)
Print Resolution	2400 x 600 dpi