Canon Laser Shot LBP2900 User Manual

Manuals
4-53
Printing a Document
4
Manuals
This section describes the procedures for installing or uninstalling the manuals
included on the CD-ROM supplied with the printer on the computer you are using.
Installing the Manuals
Install the manuals in the CD-ROM supplied with the printer on the computer using
the following procedure.
1 Insert the supplied "LBP2900 User Software" CD-ROM into
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
IMPORTANT
• If you are using Windows Vista and the [AutoPlay] dialog box appears, click [Run
AUTORUN.EXE].
• If CD-ROM Setup does not appear, display it using the following procedures. (The
CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name
may differ depending on the computer you are using.)
- If you are using an operating system other than Windows Vista, select [Run] from
the [Start] menu, enter "D:\English\MInst.exe", and then click [OK].
- If you are using Windows Vista, enter "D:\English\MInst.exe" in [Start Search]
under the [Start] menu, and then press the [ENTER] key on your keyboard.
NOTE
If you are using Windows Vista and the [User Account Control] dialog box appears,
click [Allow].

Canon Laser Shot LBP2900 Specifications

General

Print Technology	Laser
Print Speed	12 ppm (A4)
Paper Handling	150-sheet input tray
Connectivity	USB 2.0
Memory	2 MB
Dimensions	370 x 251 x 217 mm
Weight	5.7 kg
Supported Paper Types	Plain Paper, Heavy Paper, Transparency, Label, Envelope
Operating System Support	Linux
Warm-up Time	0 seconds
First Print Out Time	9.3 seconds
Paper Size	A4, Letter, Legal
Power Consumption	259 W (Printing), 2 W (Standby)
Print Resolution	2400 x 600 dpi