Canon Laser Shot LBP2900 User Manual

Troubleshooting Map
6-2
Tr oubleshooting
6
Troubleshooting Map
If you have any problems while you are using the printer, use the flow chart shown
below to determine the cause of the problem.
The toner density is set too
light
➞Chapter 4: Specifying the Print
Quality (p. 4-41)
The toner is running out
➞Chapter 5: Replacing the Toner
Cartridge (p. 5-2)
The printer is not connected to the
computer
➞Chapter 1: Connecting to a Computer
(p. 1-12)
Follow the directions displayed in
the Printer Status Window to
resolve the problem
➞Chapter 4: Printer Status Window
(p. 4-58)
The power cord is not connected
The power switch is off
➞Chapter 1: Turning the Printer On and Off
(p. 1-15)
The printer driver is not properly
installed
➞Chapter 6: Installation Problems (p. 6-27)
The installation environment is
bad
➞Getting Started Guide
Miscellaneous Problems
➞Chapter 6: Print Quality Problems
(p. 6-22)
Paper Problems
➞ Chapter 6: Paper Problems (p. 6-25)
The printer driver is not properly
installed
➞Chapter 6: Installation Problems (p. 6-27)
Cannot Print
The printing
quality is poor
An error is
displayed in the Printer
Status Window
The printer
driver cannot be
used
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No

Canon Laser Shot LBP2900 Specifications

General

Print Technology	Laser
Print Speed	12 ppm (A4)
Paper Handling	150-sheet input tray
Connectivity	USB 2.0
Memory	2 MB
Dimensions	370 x 251 x 217 mm
Weight	5.7 kg
Supported Paper Types	Plain Paper, Heavy Paper, Transparency, Label, Envelope
Operating System Support	Linux
Warm-up Time	0 seconds
First Print Out Time	9.3 seconds
Paper Size	A4, Letter, Legal
Power Consumption	259 W (Printing), 2 W (Standby)
Print Resolution	2400 x 600 dpi