LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications
-10-
７．Error Code Table
Error Code Contents
?
-When the received data cannot be decoded
-Parameter determination error (digit number error,
including invalid value, etc.)
101 The function is not available in the selected Mode
102 Selected value is out of range (Not reflected)
103
Command mismatched to Hardware (command for
Optional function which is not installed)
201
When reached upper or lower limit of increasing or
decreasing data
301
Command cannot be executed during capturing
display. Resend the command after a while
302
Command cannot be executed during Auto PC
operation. Resend the command after a while
402
Command cannot be executed during PIN code
operation. Resend the command after a while.
Note) These error codes are applied to Expand Command, not to Basic Command
To Next Page
Loading...
Need help?
General
