Canon LV-7392A User Manual

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications

-25-
8.7.4 CF_VSCALE Command
Command “CF_VSCALE_%1”[CR]
%1
“032” --------- +32
“031” --------- +31
：
“002” --------- +2
“001” --------- +1
“000” --------- +
0
“-01” ---------- -1
“-02” ---------- -2
：
“-31” ---------- -31
“-32” ---------- -32
“UP” ---------- Vertical Scale setting value + 1
“DN” ---------- Vertical Scale setting value - 1
Details
Set Vertical Scale
This command is available in normal Power ON status.
Note1) When Screen setting is not in Custom mode, projector changes image
mode into Custom by receiving this command.
Note2) When there is no signal detected, projector returns 101 and the command
does not execute.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.7.5 CF_VPOS Command
Command “CF_VPOS_%1”[CR]
%1
“015” --------- +15
“014” --------- +14
：
“002” --------- +2
“001” --------- +1
“000” --------- +
0
“-01” ---------- -1
“-02” ---------- -2
：
“-14” ---------- -14
“-15” ---------- -15
“UP” ---------- Vertical Position setting value + 1
“DN” ---------- Vertical Position setting value – 1
Details
Set Vertical Position
This command is available in normal Power ON status.
Note1) When Screen setting is not in Custom mode, projector changes image
mode into Custom by receiving this command.
Note2) When there is no signal detected, projector returns 101 and the command
does not execute..
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]

Canon LV-7392A Specifications

General

Brand	Canon
Model	LV-7392A
Category	Projector
Language	English