LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications
-20-
8.6 Input Control Command
8.6.1 CF_INPUT Command
Command “CF_INPUT_%1”[CR]
%1
“CONPUTER” ----- Select Computer Input
“HDMI” -------------- Select HDMI Input
“VIDEO” -------------- Select Video Input
“UP” --------------- The same operation as pressing Up key or Left key
“DN” ----------------The same operation as pressing Down key or Right key
Details
Select Input
The same operation as “INPUT” button of the projector and Remote Control.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.2 CF_SOURCE Command
Command “CF_SOURCE_%1”[CR]
%1
Input is
Computer
“ANALOG” ------- Select Analog Input
“YPBPR” ---------- Select Component Input
“S−VIDEO” ------ Select S-Video Input
“SCART” ----------- Select Scart Input
“UP” ----------------- The same operation as pressing Up key or Left
key
“DN” ------------------The same operation as pressing Down key or
Right key
Input is HDMI
“HDMI” --------- Select HDMI Input
”UP”
”DN”
Although no operation is executed, projector accepts
parameter ”UP” /”DN”
Input is Video
“VIDEO” ------------- Select Composite Video Input
”UP”
”DN”
Although no operation is executed, projector accepts
parameter ”UP” /”DN”
Details
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
returns “101” and the command is not executed.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
To Next Page
Loading...
Need help?
General
