Canon LV-7392A User Manual

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications

-39-
8.11 Other Command
8.11.1 CF_KEYENU Command
Command “CF_KEYENU_%1”[CR]
%1
“RIGHT” ------------------------- Shift Pointer on OSD Menu to right
“LEFT” --------------------------- Shift Pointer on OSD Menu to left
“UP” ------------------------------ Shift Pointer on OSD Menu to right
“DN” ------------------------------ Shift Pointer on OSD Menu to right
“SELECT” ----------------------- Behave the same as Select key
“AUTOPC” ---------------------- Execute Auto PC adj
Details
This command behave the same as corresponding keys of Remote Control /
Projector
Auto PC adj. keeps operating even though projector receives this command again
while Auto PC adj. is in process.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.11.2 CF_MENU Command
Command “CF_MENU_%1”[CR]
%1
“ON” ----------------------------- Display OSD Menu
“OFF” --------------------------- Cancel OSD menu
Details
Display / Cancel On Screen Display Menu
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.11.3 CF_POWER Command
Command “CF_POWER_%1”[CR]
%1
“ON” ------------Power ON projector
“OFF” ---------- Power OFF Projector
Note1) Countdown can be terminated by sending this command.
Note2) Projector returns error code due to unable of command execution depends
on its condition.
Note3) Although projector returns “OK”, operation may not be proceeding properly.
(e.g. After returning “000” for Power ON command, projector gets abnormal
temperature.) Use Status read command to get projector states.
Details Power ON / OFF projector.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]

Canon LV-7392A Specifications

General

Brand	Canon
Model	LV-7392A
Category	Projector
Language	English