Canon LV-7392A User Manual

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications

-26-
8.7.6 CF_HSCALE Command
Command “CF_HSCALE_%1”[CR]
%1
“032” --------- +32
“031” --------- +31
：
“002” --------- +2
“001” --------- +1
“000” --------- +
0
“-01” ---------- -1
“-02” ---------- -2
：
“-31” ---------- -31
“-32” ---------- -32
“UP” ---------- Horizontal Scale setting value + 1
“DN” ---------- Horizontal Scale setting value - 1
Details
Set Horizontal Scale
This command is available in normal Power ON status.
Note1) When Screen setting is not in Custom mode, projector changes image
mode into Custom by receiving this command.
Note2) When there is no signal detected, projector returns 101 and the command
does not execute.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.7.7 CF_HPOS Command
Command “CF_HPOS_%1”[CR]
%1
“015” --------- +15
“014” --------- +14
：
“002” --------- +2
“001” --------- +1
“000” --------- +
0
“-01” ---------- -1
“-02” ---------- -2
：
“-14” ---------- -14
“-15” ---------- -15
“UP” ---------- Horizontal Position setting value + 1
“DN” ---------- Horizontal Position setting value - 1
Details
Set Horizontal Position
This command is available in normal Power ON status.
Note1) When Screen setting is not in Custom mode, projector changes image
mode into Custom by receiving this command.
Note2) When there is no signal detected, projector returns 101 and the command
does not execute.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]

Canon LV-7392A Specifications

General

Brand	Canon
Model	LV-7392A
Category	Projector
Language	English