LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications
-36-
8.10.20 CF_CCAPTIONCOLOR Command
Command “CF_CCAPTIONCOLOR_%1”[CR]
%1
“COLOR” ------- Select Color
“WHITE” -------- Select White
Details
Select color of Closed caption.
The status set with this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
Closed caption is available under conditions below;
Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixed
to NTSC.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.10.21 CF_RCODE Command
Command “CF_RCODE_%1”[CR]
%1
"001” --------------------------- Select Code1
"002” --------------------------- Select Code2
“UP” --------------- The same operation as pressing Up key or Left key
“DN” --------------- The same operation as pressing Down key or Right key
Details
Select Code of Remote Control
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.10.22 CF_KEYDIS Command
Command “CF_KEYDIS_%1”[CR]
%1
“NONE” ----------------------- RC & Projector keys are valid (All are valid)
“RC” ---------------------------- RC keys are invalid
“KEY” -------------------------- Projector keys are invalid
Details
Disable RC/Projector keys
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
To Next Page
Loading...
Need help?
General
