LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications
-16-
8.4.13 CF_COLBOARD Command
Command “CF_COLBOARD_%1”[CR]
%1
“RED” --------------Select Red
“BLUE” ------------ Select Blue
“YELLOW” ------- Select Yellow
“GREEN” --------- Select Green
Details
Select Color of Colorboard mode.
Image mode is automatically switched to Colorboard mode by receiving this
command.
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.4.14 CF_IMAGEADJ Command
Command “CF_IMAGEADJ_%1”[CR]
%1
“RST” ------- Reset Image adjustment
“STR1” ----- Store current Image adjustment to Image 1
“STR2” ----- Store current Image adjustment to Image 2
“STR3” ----- Store current Image adjustment to Image 3
“STR4” ----- Store current Image adjustment to Image 4
Details
Reset / store Image adjustment.
Parameter “STR1” to “STR4” is the same as “Image1” to “Image4” displayed when
adjusting Image on OSD menu and selecting “Store”
The value stored to “Image1-4” is saved and its setting is effective even after ALL
is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
To Next Page
Loading...
Need help?
General
