Canon LV-7392A - CR_AUTOSETUPKEYSTONE Command; CR_BACKGND Command; CR_DISP Command; CR_LOGO Command

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications

-59-
9.11.4 CR_AUTOSETUPKEYSTONE Command
Command “CR_AUTOSETUPKEYSTONE” [CR]
Details Get Keystone setting status in Auto setup
Response
Acceptable “000_%a”[CR]
%a
“AUTO” -------------- Auto Keystone is Auto
“MANUAL” ---------- Auto Keystone is Manual
“OFF” ---------------- Auto Keystone is OFF
Unacceptable “Error Code”[CR]
9.11.5 CR_BACKGND Command
Command “CR_BACKGND” [CR]
Details Get setting status of Screen for no signal
Response
Acceptable “000_%1” [CR]
%1
“BLUE” -------------------------------- Blue Back is selected
“USER” ------------------------------- User is selected
“BLACK” ------------------------------ Black Back is selected
Unacceptable “Error Code” [CR]
9.11.6 CR_DISP Command
Command “CR_DISP”[CR]
Details Get setting status of Display
Response
Acceptable “000_%a”[CR]
%a
“ON” -------------------------- Display is ON
“OFF” ------------------------ Display is OFF
“CNTDWNOFF” ---------- Countdown OFF
Unacceptable “Error Code” [CR]
9.11.7 CR_LOGO Command
Command “CR_LOGO”[CR]
Details Get setting status of Logo
Response
Acceptable “000_%1”[CR]
%1
“OFF” ------------------------------ Logo function is OFF
“DFLT” ----------------------------- Default Logo is selected
“USER” ---------------------------- User Logo is selected
Unacceptable “Error Code” [CR]
9.11.8 CR_HDMISETUP Command
Command “CR_HDMISETUP”[CR]
Details Get setting status of HDMI Image setup
Response
Acceptable “000_%1”[CR]
%1
“NORMAL” ------------------------ Normal is selected
“ENHANCED” -------------------- Enhanced is selected
Unacceptable “Error Code” [CR]