Canon LV-7392A User Manual

LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M
Expand Serial Command Functional Specifications

-24-
8.7.2 CF_SCREEN Command (LV-8227A/8227M)
Command “CF_SCREEN_%1”[CR]
%1
Input is
Computer
“NORMAL” ---------------------- Select Normal mode
“FULL” --------------------------- Select Full screen mode
“WIDE” -------------------------- Select Wide (16:9) mode
“ZOOM” -------------------------- Select Zoom mode
“TRUE” -------------------------- Select True mode
“CUSTOM” ---------------------- Select Custom mode
“DZOOM_UP” ----------------- Expand image size with Digital Zoom
“DZOOM_DN” ----------------- Reduce image size with Digital Zoom
“UP” ------------------------------ The same operation as pressing Up
key or Left key
“DN” -------------------------------The same operation as pressing
Down key or Right key
Input is
Video
“NORMAL” ---------------------- Select Normal mode
“FULL” --------------------------- Select Full screen mode
“WIDE” -------------------------- Select Wide (16:9) mode
“ZOOM” -------------------------- Select Zoom mode
“NATURAL” --------------------- Select Natural mode
“CUSTOM” ---------------------- Select Custom mode
“UP” ------------------------------ The same operation as pressing Up
key or Left key
“DN” -------------------------------The same operation as pressing
Down key or Right key
AV/PC
Common
“RST” ---------------------------Resetscreenadjustment
Details
Select image size on screen.
When Input specified by %1 is inappropriate for selected Input, the projector
returns “101” [CR] and the command is not executed.
“DZOOM UP” and “DZOOM DN” start effecting from the first command.
This command is available in normal Power ON status.
Note) When Input is computer and AV sorts signals (480i / 575i…etc) are entered,
the signal recognized as Video Input.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.7.3 CF_DZCENT Command
Command “CF_DZCENT_%1”[CR]
%1 ”CENT” ---- Cancel Digital Zoom (CENT: “CENTER”)
Details
Cancel Digital Zoom
When image is expanded or shrunk, reset its value.
This command is available in normal Power ON status and when Input is
Computer.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]

Canon LV-7392A Specifications

General

Brand	Canon
Model	LV-7392A
Category	Projector
Language	English