Canon PIXMA MX320 User Manual

A
dvanced Guide
>
Scanning
>
Scanning with Other Application Software
>
Scanning with Advanced Settings Using
ScanGear (Scanner Driver)
> Scanning in Basic Mode
Scanning in Basic Mode
In Basic Mode, you can scan easily by following the on-screen steps.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Also,
the paper size is set to A4.
1.
Place the documents on the Platen or ADF (Auto Document Feeder), then start
ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
When scanning from the Platen, place the document face-down on the Platen and align an
upper corner of the document with the corner at the arrow of the Platen. See "
Placing
Documents (ADF (Auto Document Feeder)) " for details on how to place documents when
scanning from the ADF (Auto Document Feeder).
2.
Set Select Source according to the documents.
Important
Some applications do not support continuous scanning from the ADF (Auto Document Feeder).
For details, refer to the application's manual.
Note
To scan magazines containing many color photos, scan in Advanced Mode tab with Color
Mode set to Color and Descreen set to ON.
Scanning in Advanced Mode
3.
Click Preview.
Preview image appears in the Preview area.
Page 499 of 817 pagesScanning in Basic Mode

Canon PIXMA MX320 Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Fax Modem Speed	33.6 Kbps
Connectivity	USB 2.0
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	30 sheets
Print Speed (Black)	7.5 ipm
Print Speed (Color)	4.5 ipm
Scanner Type	Flatbed
Paper Sizes	Letter, Legal, A4, A5, B5, Envelopes
Ink Cartridges	PG-210 Black, CL-211 Color
Display	LCD
Paper Handling	Rear Tray: 100 sheets