Canon PIXMA MX320 User Manual

A
dvanced Guide
>
Troubleshooting
> Document Jams in the ADF
Document Jams in the ADF
Important
While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off after
receiving the fax. Do not disconnect the power plug while the machine is receiving a fax. If you
disconnect the power plug, all the documents stored in memory are deleted.
If the
Stop
button is pressed while the machine is scanning the document:
If you press the
Stop
button during scanning, Document in ADF Press OK appears on the LCD.
Press the
OK
button so that the remaining document is automatically fed out.
Removing the jammed document from the Document Tray:
Remove the document following the procedure below.
1.
If printing is in progress, press the Stop
button.
2.
Turn off the machine.
3.
If a multi-page document is loaded, remove any pages other than the jammed page from
the ADF, then open the Document Feeder Cover.
4.
Pull out the jammed document from the ADF.
5.
Close the Document Feeder Cover, then turn on the machine.
When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the machine, or if the document
j
am error continues after removing the document, contact the service center.
Page 741 of 817 pagesDocument Jams in the ADF

Canon PIXMA MX320 Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Fax Modem Speed	33.6 Kbps
Connectivity	USB 2.0
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	30 sheets
Print Speed (Black)	7.5 ipm
Print Speed (Color)	4.5 ipm
Scanner Type	Flatbed
Paper Sizes	Letter, Legal, A4, A5, B5, Envelopes
Ink Cartridges	PG-210 Black, CL-211 Color
Display	LCD
Paper Handling	Rear Tray: 100 sheets