Canon PIXMA MX320 User Manual

A
dvanced Guide
>
Scanning
>
Scanning with Other Application Software
>
Scanning with Advanced Settings Using
ScanGear (Scanner Driver)
> Scanning in Advanced Mode
Scanning in Advanced Mode
In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
This section explains how to scan paper/photos from the Platen. See "
Scanning Multiple Documents
from the ADF (Auto Document Feeder) in Advanced Mode
" to scan multiple documents placed on the
A
DF (Auto Document Feeder).
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2.
Click Advanced Mode.
The Advanced Mode tab appears.
Note
Settings are not retained when you switch between modes.
3.
Set Paper Size and Color Mode.
Input Settings
4.
Click Preview.
Preview image appears in the Preview area.
Page 501 of 817 pagesScanning in Advanced Mode

Canon PIXMA MX320 Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Fax Modem Speed	33.6 Kbps
Connectivity	USB 2.0
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	30 sheets
Print Speed (Black)	7.5 ipm
Print Speed (Color)	4.5 ipm
Scanner Type	Flatbed
Paper Sizes	Letter, Legal, A4, A5, B5, Envelopes
Ink Cartridges	PG-210 Black, CL-211 Color
Display	LCD
Paper Handling	Rear Tray: 100 sheets