larm volume
Selects the alarm volume.
OFF/Quiet/Standard/Loud
Country select
Selects the country where you are using the machine.
Note
This setting may not be available depending on the country or region of purchase.
Language selection
Changes the language for LCD messages and menus.
Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese /
Norwegian / Swedish / Danish / Finnish / Russian / Czech / Hungarian / Polish /
Slovene / Turkish / Greek / Traditional Chinese / Simplified Chinese / Korean
Quiet mode
Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
OFF/ON
Enabling this function reduces the noises generated in the following cases:
Copying
Printing from a PictBridge compliant device
Printing from a wireless communication device
Receiving the fax
Sending the fax
Printing a template form
Important
Operating speed may be reduced compared to when this setting is set to OFF.
This function may not be so effective depending on the machine's setting.
Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be reduced. To
reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to
Scanner Tab
.
For the noises while printing from the computer, refer to Reducing the Machine Noise
.
Key repeat
Enables/Disables continuous input by pressing and holding down the
or
button when setting
the number of copies, the zoom ratio, etc.
ON/OFF
Selecting ON is useful, since you do not have to press a button repeatedly.
Page top
Page 688 of 817 pagesAdvanced settings
To Next Page
Loading...
Need help?
General
