113
Print Settings/Transfer Settings
z [Select by Date] [Select by Category] [Select by Folder]
Use the or button to select a date, category or folder
and press the FUNC./SET button.
- Pressing the FUNC./SET button
again cancels the setting.
- You can select multiple dates,
categories or folders.
- Pressing the or button will
allow you to check the images by
date, category or folder.
3
For the [Select by Date], [Select by
Category] and [Select by Folder] options,
press .
4
Select [OK] and press .
z Selecting [Cancel] cancels print
settings of the selected image and
returns you to Step 1.
z The output of some printers or photo developing services
may not reflect the specified print settings.
z Print settings cannot be set for movies.
z Images are printed in order according to the file number.
z A maximum of 998 images can be selected.
z If you are connected to a printer, the button will light
blue while you are selecting images. You can start printing
at this point by pressing the button, confirming that
[Print] is selected and pressing the FUNC./SET button.
To Next Page
Loading...
Need help?
General
