143
Appendix
Converter Settings
Set up when shooting using the [IS Mode] (p. 35) by attaching the
Wide Converter WC-DC58B or Tele-converter TC-DC58C, sold
separately.
5
Set the lens on the adapter,
and turn it in the indicated
direction to attach it
securely.
z
Completely remove all dust and dirt from conversion lenses with a lens
blower brush before use. The camera may focus on any dirt that remains.
z Be careful when handling the lenses since it is easy to get
finger prints on them.
z Be careful not to drop the camera or adapter when
removing the ring.
z When using these lens attachments, you should not shoot
images in mode. It will not be possible to use the
PhotoStitch software from your computer to accurately
stitch the images together.
1
(Rec.) Menu [Converter] [Off]*/
[WC-DC58B]/[TC-DC58C].
See Menus and Settings (p. 25).
* Default setting.
z Select the attached converter.
When you remove the converter from the camera, return the
converter setting to [Off].
To Next Page
Loading...
Need help?
General
