16
2 [LCD/Viewfinder] (Display 1)/
(Display 2)/ (Display Off)
z Sets LCD monitor display mode after
the DISPLAY button is pressed.
z If you do not wish to change the
display mode, use the , , or
button and press the FUNC./SET
button to display ( / / ).
z You cannot add to the currently
active LCD/Viewfinder icon.
3 [Shooting Info]/[Grid Lines]/[3:2 Guide]/
[Histogram].
z Using the , , and
buttons, select the items you wish to
display on the LCD monitor and
press the FUNC./SET button to place
a 3.
z Even though items that are grayed
out can be set, they will not display in
the current shooting mode.
If you press the shutter button halfway and return to the
shooting screen from the custom display settings screen, the
settings will not be saved.
Display 2
Display Off
Display 1
Items with 3 are
displayed
To Next Page
Loading...
Need help?
General
