Before Use
21
The following software is available for efficiently configuring and operating the camera.
Camera Operations and Settings
Camera operations are performed using the Camera Viewer/Mobile Camera Viewer.
Camera settings are specified from the Setting Page.
Camera Viewer (P. 51) /Mobile Camera Viewer
Controls the camera, and monitors video and various events.
You can use the Camera Viewer (mainly for computers) and the Mobile Camera Viewer (mainly for devices with a
screen size of 7 inches or less).
The functions available in the Viewer differ according to the user authority (P. 55).
For details on using Mobile Camera Viewer, please refer to “Mobile Camera Viewer Operation Guide”.
Setting Page (P. 87)
The Setting Page is for the administrator to configure and manage the camera.
Software Included on the Setup CD-ROM
To use the software on the included setup CD-ROM, install the software on the computer.
.NET Framework 3.5 SP1 (when using Internet Explorer 9) or .NET Framework 4.5 (when using Internet Explorer 10/11) is necessary to use
Camera Management Tool and Recorded Video Utility.
If it is not installed on the computer, it will be automatically installed when using the installer (P. 30).
Camera Management Tool (P. 38)
This tool is used for batch managing multiple cameras, from initial settings to performing maintenance. The Camera
Management Tool can perform the following tasks.
• Detecting cameras
• Set various camera settings.
• Display the Viewer and the Setting Page.
• Update firmware, back up/restore settings, perform memory card and other operations, as well as camera
maintenance.
This guide explains how to use this tool to configure the initial settings for cameras (P. 38). For details on other uses
and functions, please refer to “Camera Management Tool User Manual”.
The Camera Management Tool can be installed by the installer application.
Installer location: Setup CD-ROM > [Applications] folder > VBToolsInstall.exe
Recorded Video Utility
This utility is used for viewing and managing the videos recorded on the memory card mounted in the camera. The
Recorded Video Utility enables you to perform the following operations on recorded videos.
• Displaying a list of videos
• Playing and deleting videos
Camera Software
To Next Page
Loading...
Need help?
General
