Appendix
239
Notification log
ï‚¢ System notification
S001 System started [info]
S002 System settings changed [info]
S010 Event service started [info]
S011 Event service shut down [info]
S012 External device service started [info]
S013 External device service shut down
[info]
S014 Timer service started [info]
S015 Timer service shut down [info]
S017 qtimer service started or shut down
[info]
S030 Heater unit detected [info]
S070 Change to certificate [info]
ï‚¢ wvhttp notification
W001 Starting and stopping of system [info]
W030 Startup and shutdown of WebView
Livescope Client [info]
Description starting paramd (S001)
Meaning Parameter management module
started.
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
Description starting event (S010)
Meaning The event service was started.
Description shutdown event (S011)
Meaning The event service was shut down.
Description starting extio (S012)
Meaning The external device input/output
service was started.
Description shutdown extio (S013)
Meaning The external device input/output
service was shut down.
Description starting timer (S014)
Meaning The timer service was started.
Description shutdown timer (S015)
Meaning The timer service was shut down.
Description %1 qtimer (S017)
%1 (starting) or (stopping)
Meaning The qtimer service was started or shut
down.
Description The heater unit is detected. (S030)
Meaning A heater unit is attached.
Description %1: succeeded to %2 certificate
(S070)
%1 ssl or 802.1X
%2 generate | load | delete | restore
Meaning A certificate was generated/loaded/
deleted/restored
Description %1 webview (W001)
%1 Starting or stopping
Meaning wvhttp server (webview) has started or
stopped.
Description %1%2 host=<Host>, user=<User>,
prio=<Priority>(W030)
%1 W: WebView session, V: Session-less
video client, N: Session-less event
client
%2 +: Connect, -: Disconnect
Meaning The camera server client was
connected or disconnected.
To Next Page
Loading...
Need help?
General
