Canon XC10 User Manual

73
Image Stabilizer
Menus
Table of Contents Index
Image Stabilizer
Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. When taking
photos, you can turn image stabilization on and off. When recording clips, there are 3 methods of image
stabilization; select the method that best suits your needs.
Standard IS : Standard IS compensates for a lower degree of camcorder shake, such as when shooting while
remaining stationary, and is suitable for shooting natural-looking scenes.
Dynamic IS* : Dynamic IS compensates for a higher degree of camcorder shake, such as when shooting
while walking, and is more effective as the zoom approaches full wide angle.
* Not available when recording 4K clips, using slow & fast motion recording mode or taking photos.
Powered IS : Powered IS is most effective when you are stationary and zooming in on far subjects using high
zoom ratios (the more you approach the telephoto end). This mode is not suitable for tilting and panning shots.
To activate Standard IS or Dynamic IS
1 Touch [FUNC.] and then touch [Image Stabilizer].
2 Select the desired option and then touch [X].
• In mode, select [i On] to turn on image stabilization.
• Select [ Off] to turn off image stabilization, for example, when recording with the camcorder mounted on
a tripod.
• The icon of the selected mode will appear on the upper right of the screen.
To activate Powered IS
1 Touch [FUNC.] and then touch [Powered IS].
2 Select [ On] and then touch [X].
• The Powered IS icon will appear on the upper right of the screen.
• Select [ Off] to return image stabilization to its previous setting.
NOTES
• If you set an assignable button to [ Powered IS] (A 97), you can press the button to turn Powered IS on or
off.
• If the degree of camcorder shake is too high, the image stabilizer may not be able to compensate fully.
• When using Dynamic IS, the edges of the picture may be adversely affected (ghosting, artifacts and/or dark
areas may appear) when compensating for a high degree of camcorder shake.
• The angle of view when using Dynamic IS differs from the angle of view when using Standard IS or no image
stabilization.
Operating modes:
Operating modes:

Canon XC10 Specifications

General

Sensor type	CMOS
Total megapixels	13.36 MP
Optical sensor size	- \
Effective megapixels (image)	12 MP
Effective megapixels (movie)	8.29 MP
Filter size	58 mm
Digital zoom	0 x
Optical zoom	10 x
Image stabilizer	Yes
Focal length range	8.9 - 89 mm
Interchangeable lens	-
Image stabilizer type	Hybrid Image Stabilization (HIS)
Maximum aperture number	2.8
Minimum aperture number	5.6
Focal length (35mm film equivalent)	27.3 - 273 mm
Memory slots	2
Camcorder media type	Memory card
Disc types supported	No
Compatible memory cards	CFast, SD, SDHC, SDXC
Internal storage capacity	- GB
Focus adjustment	Auto/Manual
ISO sensitivity	20000, 160, 320, 640, 1250, 2500, 5000, 10000
Display diagonal	3 \
Display aspect ratio	3:2
Display resolution (numeric)	1030000 pixels
Viewfinder type	Optical
Camcorder type	Handheld camcorder
Minimum illumination	0.05 lx
Product color	Black
Supported video modes	1080p, 2160p, 720p
Video formats supported	XF-AVC
Maximum video resolution	3840 x 2160 pixels
Image formats supported	JPG
Maximum image resolution	4000 x 3000 pixels
Audio system	stereo
PCM digital audio	16-bit/48 kHz
Audio formats supported	LPCM
Microphone connectivity	3.5 mm
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out	0
Wi-Fi standards	802.11a, 802.11b, 802.11g
Battery type	LP-E6N
Battery voltage	7.2 V
Battery capacity	1865 mAh
Battery life (max)	- h
Number of diaphragm blades	8
Storage temperature (T-T)	-5 - 45 °C
Operating temperature (T-T)	0 - 40 °C
Cables included	HDMI, USB

Weight and Dimensions

Depth	102 mm
Width	125 mm
Height	122 mm
Weight	930 g