81
Recording Audio
Menus
Table of Contents Index
Microphone Attenuator (Built-in Microphone)
You can activate the microphone attenuator (20 dB) for the built-in
microphone to prevent audio from being distorted if the audio level is too
high.
1Make sure ‘ [Audio Scene] is set to [„ Custom Setting]
(A 78).
2 Press the MENU button.
3 Open the [Built-in Mic Att.] submenu.
[¡ Audio Setup] > [1] > [Built-in Mic Att.]
4 Select the desired option and then touch [X].
Options
Audio Equalizer (Built-in Microphone)
You can use the audio equalizer to adjust sound levels by specifically
targeting one of the available frequency ranges.
1Make sure ‘ [Audio Scene] is set to [„ Custom Setting]
(A 78).
2 Press the MENU button.
3 Open the [Built-in Mic Freq. Response] submenu.
[¡ Audio Setup] > [1] > [Built-in Mic Freq. Response]
4 Select the desired option and then touch [X].
Options
[2 Automatic]: The camcorder will automatically activate the built-in microphone attenuator as necessary for optimal
audio recording levels so high audio levels will not be distorted.
[i On]: The built-in microphone attenuator will be activated at all times to reproduce more faithfully the sound
dynamics. When you select this option, å will appear on the screen.
[j Off]: The built-in microphone attenuator will be deactivated at all times. When you select this option,
will appear on the screen.
[h Normal]: Appropriate for balanced sound under most normal recording conditions.
[ç Boost LF Range]: Accentuates the low-frequency range for more powerful sound.
[è Low Cut Filter]: Filters the low-frequency range to reduce the noise of blowing wind, a car’s engine and
similar ambient sounds.
[é Boost MF Range]: Best for recording human voices and dialog.
[ê Boost HF+LF Range]: Best, for example, for recording live music and clearly capture the special sound
characteristics of a variety of instruments.
[¡ Audio Setup]
[1]
[Built-in Mic Att.]
[2 Automatic]
[¡ Audio Setup]
[1]
[Built-in Mic Freq. Response]
[
h Normal]
To Next Page
Loading...
