20070201
9-7-1
Using the CALC Function
9-7 Using the CALC Function
This section explains how to use the CALC function to perform statistical calculations on
spreadsheet data.
k Overview
Except for selection of the data, the statistical calculation operations you can use in the
S • SHT mode are basically the same as those in the STAT mode. This section explains the
differences between the S • SHT mode statistical calculation functions and the STAT mode
statistical calculation functions.
u Displaying the CALC Submenu
Press 6 (g )2 (CALC) to display the CALC submenu.
The functions on the CALC submenu are the same as those that appear when you press
2 (CALC) in the STAT mode List Editor. The following explains each function and where
you need to go to fi nd out more for them.
Key Description Go here for more details:
1 (1VAR)
Press to perform single-variable statistical
calculations.
“Single-Variable Statistical
Calculations” (page 6-4-2)
2 (2VAR)
Press to perform paired-variable statistical
calculations.
“Paired-Variable Statistical
Calculations” (page 6-4-2)
3 (REG)
Press to perform regression calculations.
“Regression Calculation”
(page 6-4-3)
6 (SET)
Displays a screen for specifying data to be
used for the statistical calculations performed
by pressing 1 (1VAR), 2 (2VAR), and
3 (REG).
“Confi guring Statistical
Calculation Data Settings”
(page 9-7-2)
The functions of function menu keys 1 through 3 are basically the same as the STAT
mode function menu. The settings you can confi gure with 6 (SET) are different from those
in the STAT mode.
To Next Page
Loading...
Need help?
General
