Casio fx-9750GII User Manual

20051101
9-1
Using Sample Data Memory
9 Using Sample Data Memory
Performing an EA-200 sampling operation from the E-CON2 Mode causes sampled results
to be stored in the “current data area” of E-CON2 memory. Separate data is saved for each
channel, and the data for a particular channel in the current data area is called that channel’s
“current data”.
Any time you perform a sampling operation, the current data of the channel(s) you use is
replaced by the newly sampled data. If you want to save a set of current data and keep it
from being replaced by a new sampling operation, save the data in sample data memory
under a different file name.
k Managing Sample Data Files
uu
uu
u
To save current sample data to a file
1. On the E-CON2 main menu (page 1-1), press 5(GRPH).
• This displays the Graph Mode screen.
• For details about the Graph Mode screen, see “10 Using the Graph Analysis Tools to
Graph Data”.
2. Press 2(DATA).
• This displays the Sampling Data List screen.
List of current data files
“cd” stands for “current data”. The
text on the right side of the colon
indicates the channel name.
Sampling Data List Screen
Graph Mode Screen

Casio fx-9750GII Specifications

General

Type	Graphing
Cover	-
Form factor	Desktop
Control type	Buttons
Product color	Blue
Digits	- digits
Display tilting	No
Display resolution	64 x 128 pixels
Display number of lines	8 lines
Display number of characters	21
Battery type	AAA
Power source	Battery
Auto power off	Yes
Number of batteries supported	4
Flash memory	0.061 MB
Storage media type	Flash
Symbolic notation	Square root
Conversion between	Decimal, Percent

Weight and Dimensions

Depth	180.5 mm
Width	87.5 mm
Height	21.3 mm
Weight	205 g