2-13
S Engineering Symbol (ESYM) [OPTN]-[ESYM]
• {m}/{
μ}/{n}/{p}/{f} ... {milli (10
–3
)}/{micro (10
–6
)}/{nano (10
–9
)}/{pico (10
–12
)}/{femto (10
–15
)}
• {k}/{M}/{G}/{T}/{P}/{E} ... {kilo (10
3
)}/{mega (10
6
)}/{giga (10
9
)}/{tera (10
12
)}/{peta (10
15
)}/
{exa (10
18
)}
• {ENG}/{ENG} ... shifts the decimal place of the displayed value three digits to the {left}/{right}
and {decreases}/{increases} the exponent by three.
When you are using engineering notation, the engineering symbol is also changed
accordingly.
• The {ENG} and {ENG} menu operations are available only when there is a calculation result
on the display.
I Angle Units
• Be sure to specify Comp for Mode in the Setup screen.
Example Operation
To convert 4.25 rad to degrees:
243.5070629
K(SET UP)AAAAAA*(Deg))
4.25*(E)(ANGL)**(r)U
47.3° + 82.5rad = 4774.20181°
47.382.5*(E)(ANGL)**(r)U
2°20´30˝ + 39´30˝ = 3°00´00˝
2*(E)(ANGL)**(° ’ ”) 20(° ’ ”) 30
(° ’ ”)0(° ’ ”)39(° ’ ”) 30(° ’ ”)U
(
°’”
)
2.255° = 2°15´18˝
2.255*(E)(ANGL)**(E)(DMS)U
* fx-7400G
II, fx-9750GII: AAAAA ** fx-7400GII: (ANGL)
I Trigonometric and Inverse Trigonometric Functions
• Be sure to set the angle unit before performing trigonometric function and inverse
trigonometric function calculations.
• Be sure to specify Comp for Mode in the Setup screen.
Example Operation
cos (
3
rad) = 0.5
K(SET UP)AAAAAA*(Rad))
A$(P)3U
2
•
sin 45° s cos 65° = 0.5976724775
K(SET UP)AAAAAA*(Deg))
2Q45A65U*
1
sin
–1
0.5 = 30°
(
x when sinx = 0.5)
Q(sin
–1
) 0.5*
2
U
*
1
can be omitted. * fx-7400GII, fx-9750GII: AAAAA
*
2
Input of leading zero is not necessary.
(90° = radians = 100 grads)
2
(90° = radians = 100 grads)
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
