2-4
S Calculation Result Display Range with
Display of a calculation result in format is supported for result with in up to two terms.
Calculation results in format take one of the following forms.
p
ab, p d p ab, p
a
'
b
c
p
d
'
e
f
• The following are the ranges for each of the coefficients (a, b, c, d, e, f) can be displayed in
the calculation result format.
1
a < 100, 1 < b < 1000, 1 c < 100
0
d < 100, 0 e < 1000, 1 f < 100
• In the cases shown below, a calculation result may be able to be displayed in format even
if their coefficients (
a, c, d) are outside the above ranges.
A format calculation result uses a common denominator.
a
'
b
c
+
d
'
e
f
m
a
´
'
b
+
d
´
'
e
c
´
* c´ is the least common multiple of c and f.
Since the calculation result uses a common denominator, calculation result still may be
displayed using the format even when coefficients (
a´, c´, d´) are outside the corresponding
range of coefficients (a, c, d).
Example:
'
3
11
+
'
2
10
=
10
'
3 + 11
'
2
110
Calculation Examples
This calculation: Produces this type of display:
2 s (3–25)=6–45 format
352 s 3 = 148.492424 (=
105
2)*
1
Decimal format
150
2
25
= 8.485281374*
1
23 s (5–23) = 35.32566285 (=
115
–463)*
1
Decimal format
2+3+8=3+32 format
'
2 +
'
3 +
'
6
= 5.595754113*
2
Decimal format
*
1
Decimal format because values are outside of range.
*
2
Decimal format because calculation result has three terms.
• The calculation result is displayed using decimal format even if an intermediate result goes
greater than two terms.
Example: (1 + 2+3) (1 – 2–3) (=–4–26)
= –8.898979486
• If the calculation formula has a term and a term that cannot be displayed as a fraction,
the calculation result will be displayed in decimal format.
Example: log3 + 2 = 1.891334817
To Next Page
Loading...
Need help?
General
Weight and Dimensions
