25
Getting Started with Your Phone
4. Plug the Wall Charger power plug into an
electrical outlet.
5. After the handset is completely charged,
unplug the USB Cable from the
Charging/Data Port, then close the
cover.
6. Make sure the port cover is completely closed.
Warning!
Hold the small connector with the USB
mark facing up.
When inserting the connector into the
Charging/Data port on the handset, hold the
connector straight against the port without
tilting it vertically or horizontally and gently
insert it.
Failure to completely reseal the Charging/Data Port cover after
charging may allow water or other liquids to enter the casing,
damaging the handset.
•
•
Battery Level
The battery level icon appears at the top of the main display. When
the battery level becomes low, the low battery sensor alerts you in
three ways: an audible tone will sound, the battery icon will begin to
blink, and BATTERY LOW will appear on the display. If the battery
level becomes too low, the phone automatically powers off and any
function in progress will not be saved.
To Next Page
Loading...
Need help?
General
