35
Quick Access to Convenient Features
Motion Detection
Using the Motion Detection function, you can control your handset just
by shaking it.
By default, the Motion Detection function is off. To use the Motion
Detection function:
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Phone Settings.
2. Select Motion Detection, then press the Center Select Key [OK].
3. Select one of the following settings, then press the Center Select
Key [OK].
G’zGEAR / My Pics/Videos
4. Select On or Off, then press the Center Select Key [OK].
When shaking the handset, be sure to
hold the handset firmly as shown in the figure
to the right and shake it from right to left or
vice versa.
NOTE
When shaking the handset, make sure you do not hit the handset
against nearby objects.
To Next Page
Loading...
Need help?
General
