66
Push to Talk
Calling from Keypad (Alert)
1. From idle mode, enter the 10-digit phone number of the Verizon
Wireless PTT subscriber you wish to alert.
2. Press the Left Soft Key [Alert].
3. Press and release the Red Side Key/PTT Key to alert the
individual.
The “PTT Outgoing Alert” tone will sound, and “Alerting” will
appear on the display.
If the phone number you entered has already been registered in
your PTT Contact List, the contact name will replace the phone
number entered on the display when the alert is initiated.
4. If the called party answers the alert, “Listening to” appears on the
display and you will hear the called party speaking.
If the called party chooses to ignore the alert, or if the phone is
unavailable to accept a PTT call, an “Unavailable” message will
appear on your display.
5. When the called party finishes speaking, you will hear the “Floor
Available” tone and the “Connected to” screen will appear on your
display.
6. Press and hold the Red Side Key/PTT Key to talk.
7. Release the Red Side Key/PTT Key to let the other party
talk.
8. Press the End/Power Key to end the call.
Incoming PTT Call
Incoming PTT (Barge)
1. When you receive a barge call, you will hear the calling party
speaking through the speakerphone. The calling party’s phone
number will appear on your display. If the calling party’s number
has already been registered in your PTT Contact List, the contact
name will replace the phone number on the display.
2. Press and hold the Red Side Key/PTT Key to talk.
To Next Page
Loading...
Need help?
General
