32
Getting Started with Your Phone
5. Install the battery and replace the battery cover, as previously
instructed, ensuring that you slide the Battery Cover Lock to the
LOCK position.
Connecting to the Headset Jack
You can connect a compatible device equipped with a standard
2.5mm plug to your handset for safe, convenient, hands-free
conversations.
1. To open the Headset Jack cover,
insert your fingertip into the notch and
open the cover.
2. Plug the connector into the Headset
Jack.
Warning!
Do not forcibly insert/remove the connector into/from the Headset
Jack. Carefully insert/remove it.
Failure to completely reseal the Headset Jack cover after use may
result in damage if the handset is exposed to water.
•
•
To Next Page
Loading...
Need help?
General
